ATORN STEP DRILL type N HSS vaporised DIN 338 diameter 9.00 mm
Brand: ATORN
Surface: Vaporised
Length: 125 mm
DIN: 338
Art.-no. 11046340
Manufacturer article no. 10487644
EAN 4066107024222
Brand | ATORN |
EAN | 4066107024222 |
Manufacturer Part Number | 10487644 |
Material to be processed | Steel, Non-ferrous metal, Cast metal |
Cutting material | HSS |
Surface | Vaporised |
Type | STEP |
Self-centring | Yes |
Tool holding device | Parallel shank with three tightening surfaces |
Cutting edge diameter | 9 mm |
Angle of the tip | 118 Degree |
Chip flute length | 81 mm |
Length | 125 mm |
f steel 700 | 0.160 mm/r |
DIN | 338 |
Harmonized System Code | 82075060 |
Gross Weight | 0.045 kg |
| Material groups for cutting values | Description regarding DIN | Strength Class [N/mm²] | Material No. | Vc [m/min] | f [mm/r] with diameter | Suitability |
|---|---|---|---|---|---|---|
| 1.00 Steels | ||||||
| 1.01 Free machining steel | 9 S 20 | < 900 | 1.0711 | 20-40 | 0.2-0.28 | ⚫ |
| 1.02 Structural steel | ST 37-2 | <500 | 1.0037 | 25-40 | 0.2-0.28 | ⚫ |
| 1.03 Structural steel | ST 60-2 | > 500 | 1.7735 | 20-35 | 0.15-0.2 | ⚫ |
| 1.04 Heat-treated steel | 42 CrMo 4 | <1000 | 1.7225 | 15-20 | 0.15-0.2 | ⚫ |
| 1.05 Cast iron | GS-45 | <1000 | 1.0446 | 15-20 | 0.15-0.2 | ⚫ |
| 1.06 Case-hardened steel | 16 MnCr 5 | <1200 | 1.7131 | 6-20 | 0.1-0.18 | ⚫ |
| 1.07 Ferritic/martensitic stainless steel | X 10 Cr 13 | <1100 | 1.4006 | 6-12 | 0.1-0.18 | |
| 1.08 Heat-treated steel | 43 CrMo 4 | >1000 | 1.3563 | 8-10 | 0.1-0.18 | |
| 1.09 Nitriding steel | 31 CrMoV 9 | <1300 | 1.8519 | 8-12 | 0.1-0.18 | |
| 1.10 Tool steel | X 38 CrMoV 5 1 | <1300 | 1.2343 | 6-8 | 0.1-0.18 | |
| 2.00 Stainless steels | ||||||
| 2.01 Austenitic stainless steel | G-X 2 CrNiMo 18 15 | <1100 | 1.3953 | 6-10 | 0.1-0.18 | |
| 3.00 Non-ferrous metals | ||||||
| 3.01 Long-chipping aluminium | AI99.9 | <500 | 3.0305 | 40-80 | 0.2-0.28 | ⚫ |
| 3.02 Short-chipping aluminium | G-AISi12 | <500 | 3.2581 | 30-50 | 0.2-0.28 | ⚫ |
| 3.03 Copper alloy bronze, long-chipping | CuSn4 | <1200 | 2.1016 | 15-25 | 0.15-0.2 | ⚫ |
| 3.04 Copper alloy bronze, short-chipping | CuNi12Zn24 | <850 | 2.0730 | 25-35 | 0.15-0.2 | ⚫ |
| 3.05 Copper alloy brass, long-chipping | Cu Zn 20 | <600 | 2.0250 | 35-50 | 0.2-0.28 | ⚫ |
| 3.07 Thermoplastic | Cu Zn 39 Pb 3 | <600 | 2.0381 | 60-90 | 0.2-0.28 | ⚫ |
| 3.07 Thermoplastic | PVC, Acrylglas | <100 | 20-30 | 0.2-0.28 | ⚫ | |
| 3.08 Duroplast | Bakelit, Melamin | <150 | 10-20 | 0.2-0.28 | ⚫ | |
| 3.09 Fibre-reinforced plastics | CFK, GFK | <1500 | 10-20 | 0.1-0.18 | ||
| 3.10 Graphite | C8000 | <60 | 8-12 | 0.1-0.18 | ||
| 3.11 Composite materials | - | - | ||||
| 4.00 Cast metal | ||||||
| 4.01 Grey cast iron | GG10 | <260 HB | 0.6010 | 20-25 | 0.2-0.28 | ⚫ |
| 4.02 Spheroidal graphite iron | GGG 40 | <310 HB | 0.7040 | 20-25 | 0.2-0.28 | ⚫ |
| 4.03 Ductile iron | GTW-55 | <280 HB | 0.8055 | 20-25 | 0.2-0.28 | ⚫ |
| 5.00 Special alloys | ||||||
| 5.01 Titanium alloy | TiAI5Sn2,5 | <1200 | 3.7115 | 3-6 | 0.1-0.18 | |
| 5.02 Nickel-based alloy | NiCr21Mo | <1400 | 2.4858 | 3-6 | 0.1-0.18 | |
| 5.03 Super alloys | X45CrSi 9 3 | <1400 | 1.4718 | 3-6 | 0.1-0.18 | |
Last viewed
MITUTOYO internal measuring instrument with replaceable gauge slides, 200–500 mm
GEDORE long 1/2 inch socket 15 mm DIN 3124 with bi-hexagon
push handle trolley, waterproof platform, 1200 x 800 mm, load capacity 600 kg
TRACTEL TU 8 grip hoist small basic equipment dimensions 527 x 108 x 265 mm
ATORN SC TVC end mill, aluminium diameter 10.0x32x35x80mm teeth=4 HB shaft
ORION thread GO plug gauge DIN 2281 M 72x2 ISO 6H
GEDORE screwdriver bit for TX socket T 20 1/4 inch
ZEUS knurling tool holder, 16 x 16 mm, suitable for knurls 15 x 6 x 4 mm
BISON indexing part 100 simple design for groove width 14 mm, weight 17.6 kg