ATORN HPC drill and plunge mill, 19x26x38.7x92, T=4, HA shank, ULTRA-coated
Brand: ATORN
Surface: ULTRA
Length: 92 mm
Art.-no. 16861627
Manufacturer article no. 10487969
EAN 4066107121181
Application
Ramping, grooving, drilling, roughing and finishing with maximum performance. The special end face geometry allows for ramp angles up to 45° and drilling up to 2xD without a piloting tool. The optimised geometry and carbide material, which is ideal for the operating conditions, ensure optimal chip removal and tool stability.
Execution
- End face geometry for ramping and drilling
- Solid carbide ultra-fine grain
- ULTRA-coated
- Centre cutting and clearance
- with 45° edge protection chamfer
- unequal helix angle
Advantage
- for greater stability when grooving
- up to 25 % higher feed rates
- reduced deflection
Brand | ATORN |
EAN | 4066107121181 |
Manufacturer Part Number | 10487969 |
Cutting material | SC |
Surface | ULTRA |
Type | N |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 36°, 37°, 38° |
Tool holding device | HA parallel shank |
Construction length | Short |
Cutting edge diameter | 19 mm |
Cutting edge length | 26 mm |
Clearance length | 38.7 mm |
Length | 92 mm |
Edge protection chamfer length | 0.19 mm |
Clearance diameter | 18.5 mm |
Shank diameter | 20 mm |
fz steel 1000 | 0.14 mm |
Harmonized System Code | 82077010 |
Gross Weight | 0.380 kg |
Last viewed
ATORN non-woven combination disc 115 mm A medium/grain 80
ATORN double-end box wrench 10 x 11 mm DIN 838
AUTOSTAT 77003101 washer original spare part
META plug-in rack CLIPLxD 750x500, 100 kg carrying capacity per shelf
BIMOS Neon XXL heavy-duty work chair up to 180 kg with headrest
ATORN countersink, 90°, HSSE TiAlN, unequal spiral pitch, 20.5 mm, 3-flat shank
FEIN cemented carbide core drill bit 13 mm with QuickIN holder
ASW ball joint with 3/4 inch square drive, length 90 mm
ORION metal circular saw blade, HSSE, 275 mm x 2 mm x 40 mm, BW, T=220
ATORN twist drill N HSS, DIN 1869, 5.0 mm x 160 mm x 100 mm, 118°