ATORN HPC drill and plunge mill, 25x45x63x121, T=4, HB shank, ULTRA-coated, IC
Brand: ATORN
Surface: ULTRA
Length: 121 mm
Art.-no. 16861874
Manufacturer article no. 10488023
EAN 4066107121723
Application
Ramping, grooving, drilling, roughing and finishing with maximum performance. The special end face geometry allows for ramp angles up to 45° and drilling up to 2xD without a piloting tool. The optimised geometry and carbide material, which is ideal for the operating conditions, ensure optimal chip removal and tool stability.
Execution
- End face geometry for ramping and drilling
- SC ultra-fine grain
- ULTRA-coated
- Centre cutting and clearance
- with 45° edge protection chamfer
- unequal helix angle
- with internal cooling: radial and axial outlets
Advantage
- High-performance milling with maximum cutting speeds
- for stable machine and clamping conditions
Brand | ATORN |
EAN | 4066107121723 |
Manufacturer Part Number | 10488023 |
Cutting material | SC |
Surface | ULTRA |
Type | N |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 36°, 37°, 38° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 25 mm |
Cutting edge length | 45 mm |
Clearance length | 63 mm |
Length | 121 mm |
Edge protection chamfer length | 0.25 mm |
Clearance diameter | 24 mm |
Shank diameter | 25 mm |
fz steel 1000 | 0.15 mm |
Harmonized System Code | 82077010 |
Gross Weight | 0.621 kg |
Last viewed
ATORN Bitbox Collector PH/PZ/TX, 32 pcs, with bit holder and handle
WIDIA screw for underlay KMSP415IP
OP7 reduction sleeve 18 mm
FLEX orbital sander 468.924
ATORN screwdriver TXP 27 with hole
ATORN carbide tip pair for divider
EROGLU shrink-fit chuck SK40-6-120
ATORN Smart compact clamp set
ATORN machine tap HSSE, 6HX, 45 degrees, form C, M4
DAkkS calibration f. outside micrometer w/ V-anvil 25-100 mm and 1 standard